Spontaneous rupture of bladder diverticulum with pseudo renal failure:A case report and literature review.

BACKGROUND: Spontaneous or non-traumatic bladder rupture is rare but can be life-threatening. Bladder rupture caused by a diverticulum is extremely rare, with only a few case reports in medical literature. CASE PRESENTATION: We report the case of a 32-year-old woman admitted to hospital complaints of abdominal pain, oliguria and ascites with no history of trauma. Laboratory tests revealed an elevated serum urea nitrogen(UN) level of 33.5 mmol/l and an elevated creatinine levels of 528 umol/l. X-ray cystography confirmed the rupture of a bladder diverticulum. Subsequent transurethral catheterization led to a prompt increase in urinary output, and serum creatinine level returned to 40 umol/l within 48 h. The patient was successfully treated with laparoscopic diverticulectomy. CONCLUSION: Clinicians should maintain a high level of suspicion for urinary bladder rupture in cases presenting with acute lower abdominal pain, urinary difficulties, and oliguria. When acute renal failure, complicated ascites, and an elevated peritoneal fluid creatinine or potassium level exceeding serum levels are observed, intraperitoneal urine leakage should be suspected without delay. This case emphasizes the importance of early diagnosis and intervention in managing this rare but serious condition.

Mean arterial pressure to norepinephrine equivalent dose ratio for predicting renal replacement therapy requirement: a retrospective analysis from the MIMIC-IV.

BACKGROUND: This study aimed to assess the predictive value of the ratio of mean arterial pressure (MAP) to the corresponding peak rate of norepinephrine equivalent dose (NEQ) within the first day in patients with shock for the subsequent renal replacement therapy (RRT) requirement. METHODS: Patients were identified using the Medical Information Mart for Intensive Care IV (MIMIC-IV) database. The relationship was investigated using a restricted cubic spline curve, and propensity score matching(PSM) was used to eliminate differences between groups. Odds ratios (OR) with 95% confidence intervals (CI) were calculated using logistic regression. Variable significance was assessed using extreme gradient boosting (XGBoost), and receiver operating characteristic (ROC) curves were generated. RESULTS: Of the 5775 patients, 301 (5.2%) received RRT. The MAP/NEQ index showed a declining L-shaped relationship for RRT. After PSM, the adjusted OR per 100 mmHg/mcg/kg/min for RRT was 0.93(95% CI 0.88-0.98). The most influential factors for RRT were fluid balance, baseline creatinine, and the MAP/NEQ index. The threshold for the MAP/NEQ index predicting RRT was 161.7 mmHg/mcg/kg/min (specificity: 65.8%, sensitivity: 74.8%) with an area under the ROC curve of 75.9% (95% CI 73.1-78.8). CONCLUSIONS: The MAP/NEQ index served as an alternative predictor of RRT necessity based on the NEQ for adult patients who received at least one vasopressor over 6 h within the first 24 h of intensive care unit(ICU) admission. Dynamic modulation of the MAP/NEQ index by the synergistic use of various low-dose vasopressors targeting urine output may be beneficial for exploring individualized optimization of MAP.

Efficacy of opioids for traumatic pain in the emergency department: a systematic review and Bayesian network meta-analysis.

Aim: To systematically assess and rank the efficacy of opioid medications for traumatic pain in the emergency department in terms of pain relief, adverse events and rescue analgesia. Methods: Four databases were systematically searched until 26 September 2022: PubMed, Embase, Cochrane Library, and Web of Science. Outcomes were pain relief, adverse events (dizziness, hypotension, pruritus, sedation), and rescue analgesia. For each outcome, network plots were drawn to exhibit direct and indirect comparisons, and rank probabilities were utilized to rank the efficacy of different opioids. Results: Twenty studies of 3,040 patients were eligible for this network meta-analysis. According to the rank probabilities, the top three analgesic medications for pain relief may be sufentanil (78.29% probability of ranking first), buprenorphine (48.54% probability of ranking second) and fentanyl (53.25% probability of ranking third); buprenorphine (31.20%), fentanyl (20.14%) and sufentanil (21.55%) were least likely to cause dizziness; the top three analgesic medications which were least likely to cause hypotension were buprenorphine (81.64%), morphine (45.02%) and sufentanil (17.27%); butorphanol (40.56%), morphine (41.11%) and fentanyl (14.63%) were least likely to cause pruritus; the top three medications which were least likely to cause sedation were hydrocodone + acetaminophen (97.92%), morphine (61.85%) and butorphanol (55.24%); patients who received oxycodone (83.64%), butorphanol (38.31%) and fentanyl (25.91%) were least likely to need rescue analgesia in sequence. Conclusion: Sufentanil, buprenorphine and fentanyl may be superior to other opioid medications in terms of pain relief and the incidence of dizziness, hypotension and pruritus, which might be selected as opioid analgesics for traumatic pain in the emergency setting.

Establishment of predictive models for acute complicated appendicitis during pregnancy-A retrospective case-control study.

OBJECTIVE: To develop a scoring system based on clinical and imaging features to distinguish complicated appendicitis (CA) from uncomplicated appendicitis (UCA) during pregnancy. METHOD: This was a retrospective case-control study. Patients diagnosed with acute appendicitis during pregnancy were included, and they were divided into a CA group and a UCA group based on the intraoperative findings and the biopsy results. Multivariate logistic regression and machine learning were employed to establish a predictive model. RESULTS: A total of 342 patients were included in this study. Among them, 141 (41.23%) patients were diagnosed with CA. The predictive model contained six indices, including symptom duration time more than 24 h, fever, heart rate at least 98 beats/minute, monocyte count at least 0.72 × 109 /L, lymphocyte count at least 1 × 109 /L and direct bilirubin at least 4.75 µmol/L. The total score was 31 points, and a score of more than 15.5 points predicted the development of CA during pregnancy with area under the curve (AUC) of 0.80 (95% confidence interval 0.75-0.84) and specificity of 0.84. A decision flow chart for distinguishing CA from UCA during pregnancy was developed by Decision Tree with an AUC of 0.78. CONCLUSION: The models combining clinical findings and laboratory tests, developed by two methods, can distinguish CA from UCA in pregnancy in a convenient and visualized way. TRIAL REGISTRATION: The research has been registered in Chinese Clinical Trial Registry on January 7, 2022 with registration ID ChiCTR2200055339.

Remodeling of maternal mRNA through poly(A) tail orchestrates human oocyte-to-embryo transition.

Poly(A)-tail-mediated post-transcriptional regulation of maternal mRNAs is vital in the oocyte-to-embryo transition (OET). Nothing is known about poly(A) tail dynamics during the human OET. Here, we show that poly(A) tail length and internal non-A residues are highly dynamic during the human OET, using poly(A)-inclusive RNA isoform sequencing (PAIso-seq). Unexpectedly, maternal mRNAs undergo global remodeling: after deadenylation or partial degradation into 3'-UTRs, they are re-polyadenylated to produce polyadenylated degradation intermediates, coinciding with massive incorporation of non-A residues, particularly internal long consecutive U residues, into the newly synthesized poly(A) tails. Moreover, TUT4 and TUT7 contribute to the incorporation of these U residues, BTG4-mediated deadenylation produces substrates for maternal mRNA re-polyadenylation, and TENT4A and TENT4B incorporate internal G residues. The maternal mRNA remodeling is further confirmed using PAIso-seq2. Importantly, maternal mRNA remodeling is essential for the first cleavage of human embryos. Together, these findings broaden our understanding of the post-transcriptional regulation of maternal mRNAs during the human OET.

Clinical efficacy of surgical treatment of refractory hyperthyroidism in 56 patients / 中国基层医药

Methods:The clinical data and follow-up results of 56 patients with refractory hyperthyroidism who underwent laparoscopy or open surgery in Affiliated Nanhua Hospital of University of South China from January 2019 to August 2020 were retrospectively analyzed.Results:Among the 56 patients, there were 6 men and 50 women. Thirty-six (64.3%) patients underwent endoscopic surgery and twenty (35.7%) patients underwent open surgery. The operation time was (132.0 ± 32.0) minutes. Intraoperative blood loss was (32.4 ± 27.8) mL. Postoperative parathyroid hormone level was (27.8 ± 18.3) ng/L. Forty-nine (87.5%) patients showed benign pathology results after surgery. After surgery, 14 (25.0%) patients had hypothyroidism, including 7 (12.5%) patients with hyperthyroidism combined with thyroid cancer. There were no patients with permanent hypothyroidism or recurrent laryngeal nerve paralysis. All patients had a good prognosis and satisfactory surgical results.Conclusion:With the update of preoperative preparation methods for hyperthyroidism, the increasing maturity of thyroid surgery technology, and the use of new energy instruments and technologies, surgical treatment is undoubtedly a good treatment method for patients with refractory hyperthyroidism or a suspected malignant tumor.Objevtives:To investigate the indications and clinical efficacy of surgical treatment in patients with refractory hyperthyroidism.

Single-cell meta-analysis of inflammatory bowel disease with scIBD.

Understanding the heterogeneous intestinal microenvironment is critical to uncover the pathogenesis of inflammatory bowel disease (IBD). Recent advances in single-cell RNA sequencing (scRNA-seq) have identified certain cell types and genes that could contribute to IBD; however, a comprehensively integrated analysis of these scRNA-seq datasets is not yet available. Here we introduce scIBD, a platform for single-cell meta-analysis of IBD with interactive and visualization features, which combines highly curated single-cell datasets in a uniform workflow, enabling identifying rare or less-characterized cell types in IBD and dissecting the commonalities, as well as the differences between ulcerative colitis and Crohn's disease. scIBD also incorporates multifunctional information-including regulon activity, GWAS-implicated risk genes and genes targeted by therapeutics-to infer clinically relevant cell-type specificity. Collectively, scIBD is a user-friendly web-based platform for the community to analyze the transcriptome features and gene regulatory networks associated with the pathogenesis and treatment of IBD at single-cell resolution.

Individualized 3D printed navigation template-assisted atlantoaxial pedicle screws vs. free-hand screws for the treatment of upper cervical fractures.

Objective: This study aims to compare the efficacy and safety of freehand atlantoaxial pedicle screws against custom 3D printed navigation template screws in the treatment of upper cervical fractures. Methods: In our institution from 2010 to 2020, a retrospective cohort analysis of 23 patients with upper cervical fractures was done. These patients were separated into two groups: group A (N = 12), which received customized 3D printed navigation template-assisted screws with virtual reality techniques, and group B (N = 11), which received freehand screws assisted by intraoperative fluoroscopy. Every patient was monitored for more than 1 year. The two groups were contrasted in terms of screw implant accuracy, cervical spine Japanese Orthopaedic Association (JOA) score, American Spinal Injury Association (ASIA) score, visual analogue scale (VAS) score, surgical time, fluoroscopy times, and intraoperative blood loss. Results: A total of 88 atlantoaxial pedicle screws in all, 46 in group A and 42 in group B, were implanted. In group A, the screw insertion accuracy rate was 95.7%, compared to 80.0% in group B (P < 0.05). When compared to group B, group A had shorter surgery times, less blood loss, fewer fluoroscopies, a higher short-term JOA score, and overt pain reduction (P < 0.05). However, there was no discernible difference between the two groups' VAS scores, long-term JOA scores, or ASIA scores (sensory and motor), at the most recent follow-up. Conclusion: Individualized 3D printed guide leads to significant improvement in the screw safety, efficacy, and accuracy, which may be a promising strategy for the treatment of upper cervical fractures.

[Development and clinical application of a new transverse process retractor based on computer-aided design and 3D printing technology].

OBJECTIVE: To manufacture a new type of transverse process retractor by using computer-aided design(CAD) combined with 3D printing technology and investigate its clinical application effect. METHODS: A new type of transverse protrusion retractor was developed by CAD combined with 3D printing technology. From September 2018 to September 2019, the new transverse process retractor was applied in clinic. Sixty patients with lumbar single segment lesions who needed treatment by pedicle screw fixation, bone grafting and interbody fusion were divided into new transverse process retractor group and control group, with 30 cases in each group. There were 14 males and 16 females in new type transverse process retractor group, the age was (68.0±4.3) years old on average; lesion segment of 8 cases were L3,4, 9 cases were L4,5, 13 cases were L5S1;5 cases of lumbar disc herniation, 20 cases of lumbar spinal stenosis, 5 cases of degenerative lumbar spondylolisthesis;new transverse process retractor was used to pedicle screw placement. While there were 15 males and 15 females in control group, with an average age of (69.2±4.5) years old;lesion segment of 8 cases were L3,4, 10 cases were L4,5, 12 cases were L5S1;5 cases of lumbar disc herniation, 21 cases of lumbar spinal stenosis, 4 cases of degenerative lumbar spondylolisthesis;the traditional lamina retractor was used for soft tissue pulling and finished pedicle screw placement by freehand. The length of surgical incision, the time required for inserting a single screw, fluoroscopy times, the times of adjusting the positioning needle or screw in insertion process, and the visual analogue scale (VAS) of surgical incision 72 hours after operation were compared between two groups. RESULTS: Using CAD and 3D printing technology, a new type of transverse protrusion retractor was developed quickly. The length of surgical incision, the time required for inserting a single screw, fluoroscopy time, and the times of adjusting the positioning needle or screw in insertion process in new transverse process retractor group were less than those in control group(P<0.05). There was no significant difference in VAS of lumbar incision pain at 72 hours after operation between two groups(P>0.05). CONCLUSION: Using CAD combined with 3D printing technology to develop a new transverse protrusion retractor has the advantages of convenient design, short development cycle and low cost. It provides a new idea for the research and development of new medical devices. The new transverse process retractor has the advantages of easy operation, reliable fixation, less damage to paravertebral muscle, convenient pedicle screw placement, reducing fluoroscopy time and so on.

Dual-target one-step nested PCR for sensitive detection of SARS-CoV-2 nucleic acids.

The Corona Virus Disease reported in 2019 (COVID-19) poses a significant threat to human and public health. Its early and accurate detection can reduce the spread and recurrence of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). Real-time reverse transcription fluorescent quantitative polymerase chain reaction (RT-qPCR) is the "gold standard" for detecting the nucleic acid of SARS-CoV-2. This study developed and tested a dual-target (ORF1ab and N gene) one-step nested RT-qPCR (DTO-N-PCR) to detect SARS-CoV-2. Ten-fold serial dilutions of mixed synthetic DNA from SARS-CoV-2 ORF1ab and N gene were used as templates to test the sensitivity of DTO-N-PCR. Its specificity was subsequently tested using throat swab specimens from 10 COVID-19 patients and 35 healthy participants. DTO-N-PCR was more sensitive and specific than conventional RT-qPCR. It has unique features, including a dual-target (ORF1ab and N gene), rapid one-step operation of reverse transcription and PCR, four pairs of inner and outer primers, and specific probes. These features aid in its rapid, accurate, and efficient detection of SARS-CoV-2 RNA.

The Effect of Mild Hypothermia on Nogo-A and Neurological Function in the Brain after Cardiopulmonary Resuscitation in Rats.

ObjectiveWe investigated the dynamic changes of Nogo-A protein in brain and the effects of mild therapeutic hypothermia (MTH) on its expression after cardiopulmonary resuscitation (CPR). Methods: Western-blotting and neurological scoring of 45 rats subjected to cardiac arrest and CPR with and without MTR were performed to investigate the changes in the expression of Nogo-A protein in the hippocampus and cortex over a period of time ranging from 6 h to 72 h after restoration of spontaneous circulation (ROSC). Results: Nogo-A expression levels were increased at 6 h after CPR in the hippocampus and cortex, peaked at 24 h in the cortex, and at 48 h in the hippocampus. The expression of Nogo-A in the MTR group was significantly lower at 12 h (p < 0.05) compared to those with no MTR after ROSC. Conclusions: MTR blunts the expression of Nogo-A protein in the hippocampus and cortex after cardiac arrest and resuscitation, and MTR may provide cerebral protection after ischemia.

Single-cell RNA sequencing reveals Nestin+ active neural stem cells outside the central canal after spinal cord injury.

Neural stem cells (NSCs) in the spinal cord hold great potential for repair after spinal cord injury (SCI). The ependyma in the central canal (CC) region has been considered as the NSCs source in the spinal cord. However, the ependyma function as NSCs after SCI is still under debate. We used Nestin as a marker to isolate potential NSCs and their immediate progeny, and characterized the cells before and after SCI by single-cell RNA-sequencing (scRNA-seq). We identified two subgroups of NSCs: the subgroup located within the CC cannot prime to active NSCs after SCI, while the subgroup located outside the CC were activated and exhibited the active NSCs properties after SCI. We demonstrated the comprehensive dynamic transcriptome of NSCs from quiescent to active NSCs after SCI. This study reveals that Nestin+ cells outside CC were NSCs that activated upon SCI and may thus serve as endogenous NSCs for regenerative treatment of SCI in the future.

Impact of the COVID-19 Epidemic on the Routine Emergency Services in a Tertiary Hospital, China: A Retrospective Cohort Study.

BACKGROUND: The sudden outbreak of the COVID-19 pandemic has caused tremendous challenges to the medical system. The government and hospitals have taken robust measures to curb the spread of the deadly virus. Its impact on routine medical services is gradually being taken seriously. OBJECTIVE: To identify the impact of the novel Coronavirus pandemic on emergency department (ED) patient flow and the performance of the routine ED service. METHODS: This retrospective cohort study was undertaken in a tertiary public teaching hospital ED in Chengdu, China. ED data of patients were routinely collected to compare demographic, clinical characteristics and outcomes during an 8-week period from January 1, 2019 to February 25, 2020. Data were analyzed with the chi-square statistical test. RESULTS: Over the study periods, there were 31855 and 25244 patients presented to the ED in 2019 and 2020 respectively. During the pandemic period in 2020, the daily number of average ED visits was lower than that in 2019 (430 ± 134.9 versus 572 ± 38.6, P = 0.00), with fewer triage 1&2 cases (145 ± 33.3 versus 178 ± 15.0, P = 0.00). Nevertheless, the mortality increased remarkably during the pandemic period in 2020 (0.2% versus 0.1%, P = 0.009), with higher APACHE II scores (28 versus 19, P = 0.022) and shorter ED elapsed time (0.2 versus 1.4 days, P = 0.016) among these death cases. CONCLUSIONS: The COVID-19 pandemic had an evident impact on the patient's behavioral patterns and routine emergency services, which caused higher ED mortality.

Machine learning based early mortality prediction in the emergency department.

BACKGROUND: It is a great challenge for emergency physicians to early detect the patient's deterioration and prevent unexpected death through a large amount of clinical data, which requires sufficient experience and keen insight. OBJECTIVE: To evaluate the performance of machine learning models in quantifying the severity of emergency department (ED) patients and identifying high-risk patients. METHODS: Using routinely-available demographics, vital signs and laboratory tests extracted from electronic health records (EHRs), a framework based on machine learning and feature engineering was proposed for mortality prediction. Patients who had one complete record of vital signs and laboratory tests in ED were included. The following patients were excluded: pediatric patients aged < 18 years, pregnant woman, and patients died or were discharged or hospitalized within 12 h after admission. Based on 76 original features extracted, 9 machine learning models were adopted to validate our proposed framework. Their optimal hyper-parameters were fine-tuned using the grid search method. The prediction results were evaluated on performance metrics (i.e., accuracy, area under the curve (AUC), recall and precision) with repeated 5-fold cross-validation (CV). The time window from patient admission to the prediction was analyzed at 12 h, 24 h, 48 h, and entire stay. RESULTS: We studied a total of 1114 ED patients with 71.54% (797/1114) survival and 28.46% (317/1114) death in the hospital. The results revealed a more complete time window leads to better prediction performance. Using the entire stay records, the LightGBM model with refined feature engineering demonstrated high discrimination and achieved 93.6% (±0.008) accuracy, 97.6% (±0.003) AUC, 97.1% (±0.008) recall, and 94.2% (±0.006) precision, even if no diagnostic information was utilized. CONCLUSIONS: This study quantifies the criticality of ED patients and appears to have significant potential as a clinical decision support tool in assisting physicians in their clinical routine. While the model requires validation before use elsewhere, the same methodology could be used to create a strong model for the new hospital.

[Clinical application of three-dimensional printing technique combined with thoracic pedicle screw track detector in thoracic pedicle screw placement].

OBJECTIVE: To investigate the clinical application of three-dimensional (3D) printing technique combined with a new type of thoracic pedicle screw track detector in thoracic pedicle screw placement. METHODS: According to the characteristics of thoracic pedicle and common clinical screw placement methods, a new type of thoracic pedicle screw track detector was independently developed and designed. The clinical data of 30 patients with thoracic vertebrae related diseases who underwent posterior thoracic pedicle screw fixation between March 2017 and January 2020 were retrospectively analysed. Among them, there were 18 males and 12 females with an average age of 56.3 years (range, 32-76 years). There was 1 case of thoracic disc herniation, 4 cases of thoracic canal stenosis, 2 cases of ossification of posterior longitudinal ligament of thoracic vertebra, 16 cases of thoracic trauma, 2 cases of thoracic infection, and 5 cases of thoracic canal occupation. Three-dimensional CT of the thoracic vertebra was routinely performed preoperatively, and the model of the patient's thoracic vertebra was reconstructed and printed out. With the assistance of the model, preoperative simulation was performed with the combination of the new type thoracic pedicle screw track detector, and detected no nails after critical cortical damage. During operation, one side was randomly selected to use traditional hand screws placement (control group), and the other side was selected to use 3D printing technique combined with new type thoracic pedicle screw track detector to assist thoracic pedicle screws placement (observation group). The single screw placement time, adjustment times of single screw, and blood loss during screw placement were compared between the two groups. The accuracy of screw placement in the two groups was evaluated according to postoperative CT imaging data. RESULTS: The single screw placement time, adjustment times of single screw, and blood loss during screw placement in the observation group were significantly less than those in the control group ( P<0.05). Postoperative CT examination showed that the observation group had 87 screws of grade 1, 3 screws of grade 2, and the acceptable screw placement rate was 100% (90/90); the control group had 76 screws of grade 1, 2 screws of grade 2, 11 screws of grade 3, and 1 screw of grade 4, and the acceptable screw placement rate was 86.7% (78/90); showing significant difference in screw placement between the two groups ( χ 2=12.875, P=0.001). All patients were followed up 6-18 months, with an average of 11.3 months. There was no complication of vascular, nerve, spinal cord, or visceral injury, and screws or rods broken, and no patient was revised. CONCLUSION: The 3D printing technique combined with the new type of thoracic pedicle screw track detector assisted thoracic pedicle screw placement is convenient, and significantly improves the accuracy and safety of intraoperative screw placement, and overall success rate of the surgery.

Surgical treatment for upper cervical deformity with atlantoaxial joint dislocation using individualized 3D printing occipitocervical fusion instrument: A case report and literature review.

ABSTRACT: To introduce a novel technique of using individualized 3D printing occipitocervical fusion instrument (3D-OCF) for the treatment of upper cervical deformity with atlantoaxial joint dislocation.The surgery for deformity of the craniocervical junction area is a challenge in the field of spine. If the surgical deviation is too large to injure the spinal cord or vertebral artery, it will cause catastrophic damage to the patient. Therefore, it is controversial whether these patients should undergo surgical treatment. We provide a novel surgical approach for the challenging upper cervical surgery through 3D-OCF and a typical patient.We present a 54-year-old female patient, who suffered from dizziness and numbness in her limbs for 8 months. After the patient was admitted, we performed the three-dimensional CT scan, modeled using Mimics software 17.0, and designed customized occipitocervical fusion instrument. Besides, we repeatedly perform simulated surgery based on 3D-printed models before surgery.The operative time was 142 minutes and the intraoperative blood loss was 700 mL. X-ray showed reduction of atlantoaxial dislocation and accurate position of internal fixation. The patient's symptoms were significantly relieved: the sensation of dizziness and numbness of limbs was obviously relieved, and the sense of banding in chest, abdomen, and ankle was disappeared. At the last follow-up, imaging showed that 3D-OCF had bone-integration and Syringomyelia was disappeared. The patient's cervical JOA (Japanese Orthopaedic Association) score increased from 10 points to 17 points.Individualized 3D-OCF can improve the safety and accuracy of upper cervical surgery, reduce the operative time and the number of fluoroscopy. Our study provides a novel surgical approach for the challenging upper cervical surgery.

QTL controlling fiber quality traits under salt stress in upland cotton (Gossypium hirsutum L.).

KEY MESSAGE: QTL for fiber quality traits under salt stress discerned candidate genes controlling fatty acid metabolism. Salinity stress seriously affects plant growth and limits agricultural productivity of crop plants. To dissect the genetic basis of response to salinity stress, a recombinant inbred line population was developed to compare fiber quality in upland cotton (Gossypium hirsutum L.) under salt stress and normal conditions. Based on three datasets of (1) salt stress, (2) normal growth, and (3) the difference value between salt stress and normal conditions, 51, 70, and 53 QTL were mapped, respectively. Three QTL for fiber length (FL) (qFL-Chr1-1, qFL-Chr5-5, and qFL-Chr24-4) were detected under both salt and normal conditions and explained 4.26%, 9.38%, and 3.87% of average phenotypic variation, respectively. Seven genes within intervals of two stable QTL (qFL-Chr1-1 and qFL-Chr5-5) were highly expressed in lines with extreme long fiber. A total of 35 QTL clusters comprised of 107 QTL were located on 18 chromosomes and exhibited pleiotropic effects. Thereinto, two clusters were responsible for improving five fiber quality traits, and 6 influenced FL and fiber strength (FS). The QTL with positive effect for fiber length exhibited active effects on fatty acid synthesis and elongation, but the ones with negative effect played passive roles on fatty acid degradation under salt stress.

Dynamic RNA 3' Uridylation and Guanylation during Mitosis.

Successful cell division involves highly regulated transcriptional and post-transcriptional control. The RNA poly(A) tail represents an important layer of RNA post-transcriptional regulation. Previous TAIL-seq analysis of S phase and M phase poly(A) tail information showed that only a small number of genes showed more than 2-fold change in their poly(A) tail length between the two cell cycle stages. In addition, the changes in poly(A) tail length between these two stages showed minimal impact on the translation of the genes as long as the poly(A) tails were longer than 20 nt. Therefore, the significance of poly(A) tail dynamics during the cell cycle remains largely unknown. Here, by re-analyzing the S phase and M phase TAIL-seq data, we uncovered an interesting global dynamics of RNA poly(A) tails in terms of their terminal modifications, implying global RNA regulation between mitotic cell cycles through poly(A) tail terminal modifications.